Use and Care Guide

12
Safety Key
The safety key must be inserted and turned
to “I” position to enable the mower to operate.
To prevent unauthorized use, remove the
safety key and store in a safe place.
Bail Switch
The bail switch is located on the upper
handle of the mower. The switch engages
and disengages the motor/ blade.
Safety Button
The safety button must be pressed down
before the motor can be started.
WARNING
The bail switch and the
safety button are safety
devices. Never attempt to bypass their
operations.
Handle-Locking Clamp
Locks/unlocks the side rails in the extended
or the recessed position.
Side Rails
Can be extended and locked for operation or
recessed for storage.
Handle-Adjustment Knob
Locks/unlocks the handle position when
adjusting the angle of the mower handle:
1. Locked Storage Position
2. Upper Operating Position
3. Middle Operating Position
4. Lower Operating Position
Trailing Shield and Rear Discharge Door
The trailing shield is designed to minimize
stones or other objects being thrown
backward by the mower blade. The shield
and the rear discharge door minimize the
possibility of accidental foot contact with the
blade. DO NOT operate the mower without
the trailing shield and rear discharge door in
place.
Spring-Loaded Cutting-Height Adjustment
Lever
One-handed cutting-height adjustment.
SPECIFICATIONS
Model No PM4912B-00
Rated Voltage 40V d.c. (2×20V d.c.)
No-load Speed 3100 RPM
Cutting Height 1”(25mm) – 3” (75mm)
Cutting-Height Positions 6 Settings
Deck Size 18” (45.7cm)
Grass-Bag Volume 1-1/4 Bushel (44L)
Recommended operating temperature 14 – 104°F (-10 – 40℃)
Recommended storage temperature 32 – 104°F (0 – 40℃)
Recommended charging temperature 41 – 95°F (5 – 35°C)
ACCESSORIES
WARNING
The following part is subjected to be worn out from normal use. Use
only identical replacement parts listed below.
Use of parts that do not
meet the original equipment specications may lead to improper performance and
compromised safety.
Part name Model Number
18” Lawn Mower Blade SMB1800