Use and Care Guide

Set the Handle to the Upper, Middle or Lower Operating Position:

a. Pull the two handle-adjustment knobs outward while turning them 90° counterclockwise or

clockwise to the unlock position (Fig. 3).

b. Lift the handle with one hand, then gently pivot the handle to select one of the desired

operating positions – Upper, Middle, or Lower. (Fig. 4)

NOTICE:

Taller users may prefer the upper operating position.

c. Turn the two handle-adjustment knobs back to the locked position (Fig. 3) and make sure

that the lock pin has been engaged in the desired operating position.

Fig. 3

Handle-adjustment knob

LOCK UNLOCK

Fig. 4

d. Open the two handle-locking clamps and

fully extend the side rails. Securely close the

two handle-locking clamps. (Fig. 5)

NOTICE: The motor cannot be started

unless:

•

The side rails are fully extended.

•

Both handle-locking clamps are securely

closed.

•

The handle is not located at the storage

position.

Fig. 5

handle-locking

clamps