Use and Care Guide

15
Attach/Remove the Grass Bag
WARNING
Do not at any time make
any adjustment to the
lawn mower without first stopping the
motor, removing both battery packs, and
waiting for the blade to stop rotating.
NOTICE:
Remove the mulching insert (follow
the section: “
Attach/Remove the Mulching
Insert”
) before attaching the grass bag to the
mower.
a. Remove the battery pack.
b. Lift the rear-discharge door.
c. Hook the grass bag onto the anchor stud
(Fig. 6). Release the discharge door so that it
rests on the grass bag.
d. To remove the grass bag, lift the rear-discharge door on the mower. Take the grass bag
away from the anchor stud.
e. Release the discharge door.
WARNING
When using the grass bag, never operate the mower unless the hooks
on the grass bag are firmly seated on the anchor stud and the rear-
discharge door rests firmly against the top of the grass bag.
WARNING
Under normal usage, bag material is subject to wear. To reduce the
risk of injury, frequently inspect the bag assembly and replace if there
are any signs of wear or deterioration. Use only grass bags manufactured for this
mower.
Attach/Remove the Mulching
Insert
WARNING
Do not at any time make
any adjustment to the
lawn mower without first stopping the
motor, removing both battery packs, and
waiting for the blade to stop rotating.
WARNING
The mulching insert must
be installed when not
using the grass bag.
a. Remove the battery.
b. Lift the rear-discharge door.
c. Grasp the handle of the mulching insert
and fully insert it into the mower, so that it is
securely seated (Fig. 7)
d. To remove the mulching insert, lift the rear-discharge door, grasp the handle of the mulching
insert, and pull it out.
e. Release the discharge door and make sure it rests rmly against the mulching insert.
NOTICE:
The mulching insert must be removed in order to install and use the grass bag.
1
2
Fig. 6
Rear-discharge door
Anchor Stud
Grass bag
Fig. 7
Mulching insert