Use and Care Guide

Replacing the Wheels (Fig.19)

WARNING

Always remove the

battery packs when

servicing or transporting the mower.

a. Turn the mower on its side with the upper

surface against a wall.

b. Use a at blade screwdriver to pry the dust

cover away from the wheel.

c. Use an adjustable or 1/2 inch (13mm)

wrench (not provided) to turn the nut

counterclockwise to loosen it.

d. Remove the nut and the worn wheel from the

wheel axle.

e. Mount the new wheel on the wheel axle.

Note that the round recess must face outward.

f. Lock the wheel with the nut by tightening it clockwise.

g. Mount the dust cover onto the wheel and press it in place.

Lubrication

Lubricate with light oil as directed below at least once each mowing season.

•

To prevent rusting, periodically lubricate the following parts with light oil:

–

the locking pin in the handle adjustment knob (Fig. 20);

–

the torsion spring and pivot of the rear-discharge door (Fig. 21)

Fig. 20

Locking pin

Fig. 21

Torision Spring

Pivot

•

Lubricate the wheel axle with light oil when the wheel seems stuck during operation.

•

Lubricate the deck-height adjustment joint.

Fig. 19

Dust cover

Nut

Wheel

Wheel Axle