Use and Care Guide

8
SYMBOLS (CONTINUED)
IMPORTANT:
Some of the following symbols may be used on your tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to operate the
tool better and more safely.
Symbol Name Designation/Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Wh Watt-hours Battery capacity
Ah Ampere-Hours Battery capacity
Ø Diameter Size of drill bits, grinding wheels, etc.
n
0
No load speed Rotational speed, at no load
n Rated speed Maximum attainable speed
…/min
Revolutions or reciprocation
per minute
Revolutions, strokes, surface speed,
orbits, etc. per minute
IPX4 Ingress Protection Degree Protection from splashing water
Arrow Action in the direction of arrow
Alternating current Type or a characteristic of current
Direct current Type or a characteristic of current
Maintain Safety Devices
Do not open or remove safety shields
while the tool is running.
Look Behind While Backing
Look down and behind rst to avoid
tripping when pulling back.
DANGER - Keep Bystanders
Away
Do not mow when children or others are
nearby.
KEEP HANDS and FEET AWAY
GARDEZ VOS MAINS et VOS PIEDS À DISTANCE
MANTENGA LAS MANOS Y LOS PIES ALEJADOS
DANGER - Keep Hands and
Feet Away
To reduce the risk of injury, keep hands
and feet away from rotating parts. Do not
operate unless discharge cover or grass
bag is in its proper place. If damaged,
replace immediately.