SDS

(OCV approx. 3.6 - 3.9 V/cell). Keep in closed original container.
8. Exposure controls/personal protection Exposure limit values Exposure limits
Exposure Control Measures
Exposure Limit Values: Airborne exposures to hazardous substances are not expected when the cells or
batteries are used for their intended purposes. Exposure standards are not applicable to the sealed articles.
Biological Monitoring: Not applicable.
Control Banding: Not applicable.
Recommended monitoring procedures: Follow standard monitoring procedures.
Derived no-effect level (DNEL): Not applicable.
Derived minimal effect level (DMEL): Not applicable.
Predicted no-effect concentrations (PNECs): Not applicable.
Engineering Controls
Engineering Controls: Special ventilation is not required when using these products in normal use
scenarios.Ventilation is required if there is leakage from the cell or battery.
Individual Protection Measures
Eye and Face protection: Eye protection is not required when handling cells or batteries during normal
use.Wear safety glasses/goggles if handling a leaking or ruptured cell or battery.
Skin (Hand) protection: Hand protection is not required when handling the cell or battery during normal
use.PVC gloves are recommended when dealing with a leaking or ruptured cell or battery.
Skin (clothing) protection: Skin protection is not required when handling the cell or battery during normal
use. Wear long sleeved clothing to avoid skin contact if handling a leaking or ruptured cell or battery. Soiled
clothing should be washed with detergent prior to re-use.
Respiratory protection: During routine operation, a respirator is not required. However, if dealing with an
electrolyte leakage and irritating vapors are generated, an approved half face inorganic vapor and
gas/acid/particulate respirator is required.
Thermal Protection: Not applicable.
Other Protective Equipment: Have a safety shower or eye wash station readily available
Hygiene Measures: Do not eat, drink or smoke in work areas. Avoid storing food, drink or tobacco near the
product. Practice and maintain good housekeeping.
Environmental exposure controls: Avoid release to the environment.
9. Physical and Chemical Properties
Appearance
physical state,: Solid
Color: Various
Odor: Odorless
Important health, safety and environmental information
Test method
PH Value: n.a.
Flash point: n.a
Lower explosion limits: n.a.