SDS

Shenzhen Anbotek Compliance Laboratory Limited
Page 5 of 10 Report No. SZABB180709010-02
Shenzhen Anbotek Compliance Laboratory Limited
Address: East of 4/F., Building A, Hourui No.3 Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China
Tel:[phone] Fax:[phone]Email:[e-mail] Http://www.anbotek.com.cn
(c) Immediate medical attention and special treatment
No information available.
Section 5. Fire-Fighting Measures
(a) Extinguishing media
Suitable extinguishing media: Use foam, dry powder or dry sand, CO2 as appropriate.
Unsuitable extinguishing media: No information available.
(b) Special hazards arising from the chemical
Under fire conditions, batteries may burst and release hazardous decomposition products when
exposed to a firesituation. This could result in the release of flammable or corrosive materials.
Hazardous combustion products: CO,CO2, Metal oxides, Irritating fumes.
(c) Special protective equipment and precautions for fire-fighters
Firefighters must wear fire resistant protective equipment and appropriate breathing apparatus.
The staff must equipwith filtermask (full mask) or isolated breathing apparatus. The staff must
wear the clothes which can defense thefire and the toxic gas. Put out the fire in the upwind
direction. Remove the container to the open space as soon aspossible. Spray water on the
containers in the fireplace to keep them cool until finish extinguishment.
Section 6. Accidental Release Measures
(a) Personal precautions, protective equipment and emergency procedures
If theLi-ion BATTERY material is released, remove personnel from area until fumes dissipate.
Provide maximumventilation to clear out hazardous gases. The preferred response is to leave the
area, dispose the case after thebatteries cool and vapors dissipate. Providemaximum ventilation.
Avoid skin and eye contact or inhalation of vapors.
(b) Environmental Precautions
Prevent material from contaminating soil and from entering sewers or waterways.
(c) Methods and materials for containment and cleaning up
If battery casing is dismantled, small amounts of electrolyte may leak. Collect all released
material in a plastic linedcontainer. Dispose off according to the local law and rules. Avoid
leached substances to get into the earth,canalization or waters.
Section 7. Handling and Storage
(a) Precautions for safe handling
Always follow the warning information on the batteries and in the manuals of devices. Only use