SDS

Shenzhen Anbotek Compliance Laboratory Limited
Page 7 of 10 Report No. SZABB180709010-02
Shenzhen Anbotek Compliance Laboratory Limited
Address: East of 4/F., Building A, Hourui No.3 Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China
Tel:[phone] Fax:[phone]Email:[e-mail] Http://www.anbotek.com.cn
(d)pHNot available.
(e)Melting point/freezing pointNot available.
(f)Initial boiling point and boiling rangeNot available.
(g)Flash poinNot applicable.
(h)Evaporation rate Not applicable.
(i)Flammability Non flammable.
(j)Upper/lower flammability or explosive limitsNot available.
(k)Vapor pressure Not applicable.
(l)Vapor density Not available.
(m)Relative densityNot available.
(n)Solubility(ies)Insoluble in water.
(o)Partition coefficient: n-octanol/waterNot available.
(p)Auto-ignition temperature130℃
(q)Decomposition temperatureNot available.
(r)Viscosity Not available.
Section 10. Stability and Reactivity
(a) Reactivity
Stable under recommended storage and handling conditions.
(b) Chemical stability
Stable under normal conditions.
(c) Possibility of hazardous reactions
When heated above 150℃ the risk of rupture occurs. Due to special safety construction,
rupture implies contrelease of pressure without ignition.
(d) Conditions to avoid
Do not subjectLi-ion BATTERY to mechanical shock. Keep away from open flames, high
temperature.
(e) Incompatible materials
Strong oxidizer, strong acid.
(f) Hazardous decomposition products
Under fire conditions, the electrode materials can form carcinogenic nickel and cobalt oxides.
Section 11. Toxicological Information
(a) Information on the likely routes of exposure
Inhalation: Inhalation of a large number of vapors or fumes released due to heat may cause
respiratory.