SDS

Report No.: 19PNS110176 02001
GUANGDONG UTL CO., LTD.
Lianding Testing Building, No.18 Center Road of Yayuan Industrial Zone, Nancheng District, Dongguan,
Guangdong, China
Tel: [phone] E-mail: [e-mail] Web: http://www.gdutl.com
Page
2
of 12
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND
OF THE COMPANY/UNDERTAKING
Product Identifier
Product name：Li-ion Battery
Model：601011 , 3.7V 35mAh 0.13Wh
Other means of identification
Synonyms：
Recommended use of the chemical and restrictions on use
Recommended Use：
Uses advised against：
a) Do not dismantle, open or shred secondary cells or batteries.
b) Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
c) Do not short-circuit a cell or battery. Do not store cells or batteries haphazardly in a box or drawer.
where they may short-circuit each other or be short-circuited by other metal objects.
d) Do not remove a cell or battery from its original packaging until required for use.
e) Do not subject cells or batteries to mechanical shock.
f) In the event of a call leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash the affected ares with copious amounts of water and seek medical advice.
g) Do not use any charger other than that specifically provided for use with the equipment.
h) Observe the plus(+) and minus(-) marks on the cell, battery and equipment and ensure correct use.
i) Do not use any cell or battery which is not designed for use with the equipment.
j) Do not mix cells of different manufacturer, capacity, size or type within a device.
k) Battery usage by children should be supervised.
l) Seek medical advice immediately if a cell or a battery has been swallowed.
m) Always purchase the battery recommended by the device manufacturer for the equipment.
n) Keep cells and ba tterie s clea n and dry.
o) Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
p) Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the
manufacturer’s instructions or equipment manual for proper charging instructions.
q) Do not leave a battery on prolonged charge when not in use.
r) After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several
times to obtain maximum performance.
s) Retain the original product literature for future reference.
t) Use only the cell or battery in the application for which it was intended.
u) When possible, remove the battery from the equipment when not in use.
v) Dispose of properly.
Details of the Manufacturer of the safety data sheet：
Name：Dongguan Sunly Battery Technology Co., Ltd
Address: Building 30th, Arising Sun Industrial Area, No.8 Xinyang Road, Lin Village, Tangxia Town,
Dongguan City, China
Telephone number of the supplier：[phone]