SDS

Report No.: 19PNS110176 02001
GUANGDONG UTL CO., LTD.
Lianding Testing Building, No.18 Center Road of Yayuan Industrial Zone, Nancheng District, Dongguan,
Guangdong, China
Tel: [phone] E-mail: [e-mail] Web: http://www.gdutl.com
Page
7
of 12
and clothing. Wear personal protective equipment.
Wash thoroughly after handling. Use this material with adequate ventilation.
The Product is not explosive.
Conditions for safe storage, including any incompatibilities
If the Li-ion Battery is subject to storage for such a long term as more than 3 months, it is recommended to
recharge the Lithium-ion Polymer Battery Periodically.
3 months: -10°C~ +40°C, 45 to 85% RH
And recommended at 0°C~+35°C for long period storage.
The capacity recovery rate in the delivery state (50% capacity of fully charged) after storage is assumed to be
80% or more.
The voltage for a long time storage shall be 3.7V~4.2V range.
Do not storage Lithium-ion Battery haphazardly in a box or drawer where they may short-circuit each other or be
short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Lithium-ion Polymer Battery to heat or fire. Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic materials.
Keep ignition sources away- Do not smoke.
Store in cool, dry and well-ventilated place.
Incompatible Products
None known.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Control parameters
TLV(USA)
0.02mg/m ³
MAK(Germany)
0.1mg/m ³
Other Exposure Guidelines Vacated limits revoked by the Court of Appeals decision in AFL-CIO v.
OSHA, 965 F.2d 962 (11th Cir., 1992).
Appropriate engineering controls
Engineering Measures Showers
Eyewash stations
Ventilation systems
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible
Exposure limits. Ensure or adequate ventilation.
Individual protection measures, such as personal protective equipment
Ingredients with limit values that require monitoring at the workplace:
12190-79-3 Lithium Cobalt Oxide