Owners manual

ManualsBrandsSKYJACKER ManualsAutomotiveSkyjacker 7298 Steering Stabilizer Dual Kit

01-10 GM 2500 HD 4WD

Dual Steering Stabilizer

Part # 7298

PARTS LIST

ITEM# DESCRIPTION QTY

7500WS WHITE STEERING DAMPER 2

HB-7298 HARDWARE BAG FOR 7298 1

B12RS RED BOOT, SMALL/FOR 7500WS 2

BTIE RED BOOT TIE 2

HSS HYDRO SHOCK DECAL 2

58USSW 5/8" LARGE USS WASHER 2

I-7298 INST. SHEET FOR 7298 1

HARDWARE BAG LISTING

ITEM# DESCRIPTION QTY

7298-MB GM 3/4T,7298 MAIN STAB BRKT 1

7298-DT GM 3/4T,7298 DRIVER TAB BRK 1

7298-PT GM 3/4T,7298 PASS. TAB BRKT 1

140629 EB6 STUD BAG - P932/140629 2

142120 STAB WASH PKG - P889/145098 2

HOURGLASS 5/8 HOURGLASS 5/8 SHOCK BUSHING 2

STEM BUSH-SST STEM BUSHING-STEERING STAB. 4

516X114X134U 5/16 X 1 1/4 X 1 3/4 U-BT R 2

516CTN 516-18 COARSE N/I LOCK NUT 4

516SAEW 5/16 SAE WASHER 4

Installation:

1. Park the vehicle on flat level ground & set the emergency brake.

2. Place the tires / wheels to a straight forward position.

3. While supporting the front cross member with a floor jack, remove

the front lower A-arm bolt at the frame using a 15/16" socket. Note: If

installing on a vehicle with 3” or more lift, it will be the upper front bolt

on the after market cross member.

4. Once the bolt is removed, re-install with the new Skyjacker outer

stabilizer bracket. Place the large 5/8" washer between the bracket &

the frame. (See Arrow in Photo #1) Note: Be sure to install the bolt

pointing toward the rear. Mount the new bracket so the tab sticks

back & outward toward the tire / wheel. Attach the steering stablizer

stud to the bracket. (See Photo # 2) Repeat this process on the

passenger side.

5. Mount the new Skyjacker center main bracket to the center link using

the supplied u-bolts, washers, & nuts. Do not tighten the u-bolts at

this time. (See Photo # 3)

6. Attach the cylinders to the main bracket & outer bracket. (See Photo

# 4) Center the main bracket so that both cylinders are pulled out

equal distances. (See Photo # 4 & # 5)

7. Cycle the steering left to right & check all parts for adequate

clearance.

8. Retighten all hardware after the first 100 miles.

Note: This steering stabilizer kit is designed for the 01-10 GM 2500

HD 4WD with 3"-6" lift heights. This kit will NOT work on vehicles

with a lift kit that relocates the upper A-arms.

Photo # 1

Photo # 3

Photo # 4

Photo # 5

I-7298 REV1 3-11 Pg 1

www.skyjacker.com

Photo # 2

Summary of content (2 pages)

PAGE 1
01-10 GM 2500 HD 4WD Dual Steering Stabilizer Part # 7298 www.skyjacker.com Hardware Bag PARTS LIST ITEM# DESCRIPTION QTY ITEM# 7298-MB 7500WS WHITE STEERING DAMPER 2 7298-DT HB-7298 HARDWARE BAG FOR 7298 1 7298-PT B12RS RED BOOT, SMALL/FOR 7500WS 2 140629 BTIE RED BOOT TIE 2 142120 HSS HYDRO SHOCK DECAL 2 HOURGLASS 5/8 58USSW 5/8" LARGE USS WASHER 2 I-7298 INST.
PAGE 2
Jesus Forgives, Rocks Don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. John 3:16 Juan 3:16 For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.