Instructions

DC Power Supply
Operating Instruction
BATT/PROGRAM
DC POWER SUPPLY
POWER SET
U=0.0V I=0.0A
ENTER
Scroll through the program to enter DC POWER SUPPLY program
Set the output voltage and current for the DC charger or other
devices.
After setting, press and hold ENTER button to activate the power
supply.
ENTER
To use D260 as a power supply, it is optional for the user to connect it to either AC power
source or DC power source. Once the D260 is connected to power source, switch the
button to turn on, then the user is free to use the power supply. Output voltage and
current are selectable, with voltage at 5.0-25.0V and current at 0.1-14.0A. The user can
set appropriate voltage and current based on actual practice.
Please scan and watch the tutorial video about using
DC power supply.
Video
Tutorial
POWER SET
U=13.0V I=10.0A
· 24
D260