Instructions

03 ·
Twin-channel Charger
SKYRC D260 allows you to plug 2 batteries into one charger simultaneously, and it will
intelligently and automatically charge 2 battries at once to their maximum capacity. To top
of it, the batteries being charged do not even need to have the same configuration. You
can connect different chemistry (LiPo/LiFe/Lilon/LiHV/NiMH/NiCd/Pb) batteries into any of
the charging ports.
Dual Input
Optimized Operating Software
SKYRC D260 features the so-called AUTO function that sets the feeding current during
the process of charging or discharging. Especially for lithium batteries, it can prevent the
overcharging which may lead to an explosion due to the user's fault. It can disconnect the
circuit automatically and alarm once detecting any malfunction. All the programs of this
product were controlled through two way linkage and communication, to achieve the
maximum safety and minimize the trouble. All the settings can be configured by users!
Special Features
DC Power Output Supported
With the unique feature of DC power source, the user does not have to carry additional big
and heavy power supply to the racing track or flying filed.
The input of the charger is AC 100-240V and DC 11-18V. In both AC and DC mode, the
power of each channel is 130W. Total power is 260W.
LiPo
NiMH
D260
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for each channel. You can
keep the data pertaining to program setting of the battery of continuous charging or
discharging. Users can call out these data at any time without any special program setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)