Angle Gauge Manual

ManualsBrandsSkyRC ManualsHobbyDigital Airplane CG Gauge & Angle Sensor Combo

Congratulations on the purchase of SkyRC Angle Gauge!

The gauge consists of three sensing modules, which are wirelessly controlled through Bluetooth. It

measures the surface angle and relative angle difference.

Download the RC Gears app to get started to measure the real-time measuring data.

Measuring Angles

SKYRC Angle Gauge Instruction Manual

SKYRC Angle Gauge x3

LED Indicator

* Actual angle to measure * The right-angle side is the reference side for

measuring

Switch

ChargePort

GNSS Performance Analyzer

GSM020

Corner Weight System

SCWS2000

Center of Gravity Gauge

CGG-020 & SAM-020

RC Gears

Model oneName

Center of Gravity Gauge

4. Set and input the angle in reference to the model aircraft manual.

5. Set the angle to the maximum with the remote control, and check whether the calibration range

meets the requirements indicated in the manual.

ZERO

Reference angle

Up aileron

Name

Model one Elevator Reference: sensor - relative Angle Set angle

Down aileron

Up elevator

Down elevator

Up flap

Down flap

Left angle

ZERO

37.5° 0° 35.6° 27.2° 0° 28.5°

1. SKYRC Angle Gauge SKYRC Angle Gauge 2.

1. Connect the modules.

2. Fix the reference module to the position where the surface of the model aircraft is referenced.

3. Fix the left and right modules on the rudder surface to measure.

Note: The right-angle must face the outside of the rudder surface and be parallel to the edge of

the rudder surface.

Instruction Manual

v1.0

SK - 500040

ANGLE GAUGE

Connecting

What is inside the box

Introduction

RC Gears

* Please scan the QR code

to download the RC Gears app

from App Store or Google Play!

* Long press the switch

to turn on the modules.

1. Long press to turn on. Enable the Bluetooth on your

smartphone and open the APP.

2. Search to connect

Weight CG

Angle Throw

Unassigned Scale

Searching...

Angle-meter

Unassigned Scale

进入

Unassigned Scale

未分配位置

进入

Position Reference

Reference

Left Right

Angle meter Angle meter

Back OK

3. Set up the reference surface, left and right. The corresponding module flashes blue during

the setting.

* The module flashes in blue

RED warns that the maximum adjustable angle of the

corresponding wing is greater than the calibration range

GREEN indicates that the maximum adjustable angle of the

corresponding wing is within the calibration range

Name

Model one Elevator Reference: sensor - relative Angle Set angle

Name

Model one Elevator Reference: sensor - relative Angle Set angle

Reference angle Right angleLeft angle Reference angle Right angleLeft angle

ZERO

Summary of content (2 pages)

PAGE 1
SKYRC Angle Gauge Instruction Manual ANGLE GAUGE Instruction Manual v1.0 Measuring Angles SK - 500040 1. Connect the modules. 2. Fix the reference module to the position where the surface of the model aircraft is referenced. Introduction Congratulations on the purchase of SkyRC Angle Gauge! The gauge consists of three sensing modules, which are wirelessly controlled through Bluetooth. It measures the surface angle and relative angle difference.
PAGE 2
SKYRC Angle Gauge Instruction Manual SKYRC Angle Gauge Instruction Manual Measure Throw Specifications Low-voltage Protection: Storage Temperature: -10 C-50 C 1. Connect the modules, and choose Throw to enter the page. Working Voltage: 3.4-4.2V 2. Fix the reference module to the position where the surface of the model aircraft is referenced Working Current: ＜10mA 3. Fix the left and right modules on the rudder surface to measure.