Owner Manual

Attach another two lateral V-rings to frame holes in the

same way as 5.2

Now there are 8 V-rings are attached to the Top tube.

And 8 Springs have been used.

V-ring

Frame

Attach the Spring as follows:

Hook one end of Spring (4) into the V-ring sewn on Jumping

mat (3).

Hook a Spring Tool as shown to the free end of the Spring.

Pull the Spring (4) until it reaches the frame.

There are 56 springs around the edge of Jumping mat(3)

and 56 holes around the top tube.

It is wise to wear leather gloves while attaching the springs.

Be careful where you place your hands as the Springs and

Frame joints can pinch.

Push the end of the Spring (4) into a hole in the frame, then

unlook the Spring Tool

NOTE:

CAUTION:

5.3

NOTE:

Count exactly the quantity of V-rings and the spring holes

on frame top, make sure each of them are corresponding.

Attach other V-rings to frame holes on left side of

T-joint or Socket in the same way as 5.2

5.4

T-joint

Enclosure door