Owner Manual

7. Look underneath the trampoline. Locate the straps

attached to the underside of the Frame pad. Position

each outer strap so that one strap is on each side of

the frame as shown. Tie the outside straps sewn to

the pad Joints to each side of the frame as shown

and attach the inner straps to the near V-rings.

Repeat this step to tie the remaining straps (not shown).

Strap sewn in the outside of

the Joint for the pad bottom

Inner Straps

Frame

V-ring

Outer Strap

Inner Straps

Slide the Straight Tube(9) and Curved Tube(10)

into Foams (11) as shown.

Lay one Straight Tube(9) with Foam and one

Curved Tube(10) with Foam on the ground.

Insert the Straight Tube(9) into the Curved

Tube(10). Secure with a M4.8x16mm Self-

tapping screw(7)

Repeat this step to attach the five remaining

Straight Tubes(9) and Curved Tubes(10) together

(not shown).