Owner Manual

Socket

Insert the end cap(13) into the bottom hole of the

Socket as shown.

12.

Your trampoline and enclosure are fully assembled now.

Make sure that all parts are securely attached.

Familiarize yourself and all users with the trampoline

and enclosure with the safety precautions, use and

instructional materials, and care and maintenance

instructions in this manual before using the trampoline

and enclosure.

Disassembly

To disassemble the enclosure and trampoline, follow assembly steps 1 through 11 in reverse order.

Replacing the Enclosure net

If your Enclosure net is damaged after using a period of time, you need to replace it by following assembly steps

4-7 and 10-13 in reserve order.

13.

Strap

Using a ladder, reach to the top of the enclosure

poles and tie the straps around the pole caps as

shown. Make sure to secure the knot tightly.

(Do not stand on the edge of the trampoline to do

this step. It can be dangerous and could damage

the trampoline).

14.

Using the included plastic tie, attach the Safety Placard

to the frame near the point whare jumpers will climb

onto and off the trampoline.

Safety Placard

Frame