Owner Manual

Socket

12.

13.

Strap

14.

Safety Placard

Frame

Insert the end cap(13) into the bottom hole of the

Socket as shown.

Using a ladder, reach to the top of the enclosure poles

and tie the straps around the pole caps as shown. Make

sure to secure the knot tightly.(Do not stand on the edge

of the trampoline to do this step. It can be dangerous

and could damage the trampoline).

Using the included plastic tie, attach the Safety Placard

to the frame near the point whare jumpers will climb

onto and off the trampoline.

Your trampoline and enclosure are fully assembled now.

Make sure that all parts are securely attached.

Familiarize yourself and all users with the trampo-

line and enclosure with the safety precautions, use

and instructional materials, and care and mainte-

nance instructions in this manual before using the

trampoline and enclosure.

Disassembly

To disassemble the enclosure and trampoline, follow assembly steps 1 through 11 in reverse order.

Replacing the Enclosure net

If your Enclosure net is damaged after using a period of time, you need to replace it by following assembly

steps 4-7 and 10-13 in reserve order.