ASSEMBLY, MAINTENANCE, & USER MANUAL 60” MINI TRAMPOLINE WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 100 lbs. Skywalker Holdings LLC P.O.
TABLE OF CONTENTS Part List...........................................................................................................................................................................3 Part Identification...............................................................................................................................................4-5 Exploded Drawing..................................................................................................................................
PART LIST Key No. Qty. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 # # 6 6 6 6 6 1 1 36 6 6 6 6 6 6 6 32 1 1 1 Frame Tube Leg Enclosure Tube Rail Joint Mat with net Pad with net Elastic with ball Upper foam 21.5 in (545 mm) Middle foam 11.9 in (302 mm) Lower foam 8 in (205 mm) Rail foam 23.
PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares to the left (key numbers) will help you identify the parts during assembly. 1 Frame Tube (x6) 2 Leg (x6) 3 Enclosure tube (x6) 4 Rail (x6) 5 Joint (x6) 6 Mat with Net (x1) 7 Pad with Net (x1) 8 Elastic with Ball (x36) Middle foam 11.9” (302 mm) (x6) 11 10 Lower foam 8” (205 mm) (x6) 4 9 12 Upper foam 21.5” (545 mm) (x6) Rail foam 23.
13 16 Sleeve (x6) Self-tapping Screw (x32) two spare parts 14 Pole Cap (x6) 17 Screw Driver (x1) 5 15 End cap (x6) (Pre-installed)
EXPLODED DRAWING (14) (14) (14) (14) (14) (14) (16) (16) (16) (4) (16) (4) (16) (5) (3) (5) (4) (5) (16) (5) (3) (16) (16) (16) (4) (4) (3) (16) (5) (5) (4) (7) (16) (16) (1) (16) (16) (3) (3) (2) (3) (2) (1) (1) (16) (15) (2) (1) (1) (2) (1) (16) (15) (16) (2) (2) (16) (16) (15) (15) 6 (15)
ASSEMBLY READ THIS BEFORE YOU BEGIN • You’ll probably need at least two adults and 2 hours to assemble your trampoline (of course, that depends on what model you have, and whether or not you’re secretly a superhero) • We’ve provided some tools to help with assembly, but you’re more than welcome to use your own. There will also be a part in the assembly process where gloves will come in handy.
ASSEMBLY STEP 3 Next, connect all the frame pieces together. Note: If the bottom of the legs are leaning noticably inward and not flat on the ground, go back to Step 2 and make sure you assemble the larger side of the frame into the left side of the leg socket with the bend of the leg pointing away from you. STEP 4 6 Mat with Net (x1) 8 Elastic with Ball (x6) Place the mat with net (6) on the ground inside the frame.
STEP 5 8 Following the pattern below and beginning with the 7th band, continue to place the elastic bands around the frame in a clockwise direction until all 30 bands are used. It will get tight as you near the end of attaching the stretch bands and wearing gloves will come in handy at this point to prevent blisters.
ASSEMBLY STEP 7 Put the Lower foam (11) onto the tube as shown. 11 Lower foam 8” (205 mm) (x6) STEP 8 Unfold the enclosure net attached to the mat, find the hole on net. Slide a Joint (5) into the holes from the inside of net. Repeat this step until all Joints have been places inside the net.
STEP 9 3 Enclosure tube (x1) STEP 10 16 Insert the Enclosure tube (3) into Joint (5) as shown. Make sure the holes are aligned. Secure the Joint and enclosure tube with screws (16) as shown. Note: Unless you’re fast with the wrist twist, you might want to use your screwdriver now.
ASSEMBLY STEP 11 10 Middle foam 11” (302 mm) (x1) STEP 12 16 Slide the Middle foam (10) onto the assembled encloure tube (3) as shown. Then put the assembled encloure tube (3) onto the leg tube and secure the joint with screws (16) as shown.
STEP 13 Repeat steps 9-12 to assemble the remaining five Enclosure tubes (3). STEP 14 Put the Upper foam (9) onto the enclosure tube as shown.
ASSEMBLY STEP 15 4 Rail (x6) Insert a rail foam (12) into the sleeve (13). Then insert the rail (4) into the foam with sleeve. 12 Rail foam 23.4” (595 mm) (x6) 13 Sleeve (x6) STEP 16 Insert the one end of the Rail (2) into the joint (5). Secure with screw (16). Note: Leave the other end free as shown. 16 Repeat to assemble the remaining five rails.
STEP 17 Insert the other end of the Rail (2) into the joint (5). Secure with screw (16). Repeat to assemble the remaining five rails. 16 Self-tapping Screw (x6) STEP 18 Now place pole cap (14) on top of the enclosure tube.
ASSEMBLY STEP 19 Place the straps that are at the top of the enclosure net over the pole caps (14). 16 Self-tapping Screw (x6) Insert self-tapping screws (16) into the holes at the bottom of the legs. Tighten to secure in place. STEP 21 Congratulations on completing your new Mini Bouncer! (See, we knew you could do it!). If you love the product, we want to from hear you! Please leave us a review on the retailer’s site you purchased this product from, on our Facebook page, or on any other review site.
MAINTENANCE & CARE INFORMATION Congratulations and high five on successfully assembling your new Skywalker Trampolines Mini Bouncer! Now, the best way to keep your new trampoline in tip-top shape is to check periodically for: • • • • • • • Missing, improperly positioned, or insecurely attached frame padding, netting, enclosure tubes, or foam sleeves Punctures, frays, tears, or holes worn in the mat, frame padding, netting or foam sleeves Deterioration in the stitching or fabric of the mat, frame padding or
INSTRUCTIONS FOR USE To reduce the risk of serious injury, read and follow all of the warnings, precautions, and instructions in this manual before you use the trampoline enclosure. Warnings and instructions for care, maintenance, and use of this trampoline and enclosure are included to promote safe enjoyable use of this equipment. 1. 2. 3. 17. Please remove any jewelry before jumping begins. Jewelry may get caught in the enclosure netting.
METHODS OF ACCIDENT PREVENTION THE SUPERVISOR’S ROLE IN PREVENTING ACCIDENTS It is the responsibility of the supervisors of trampoline users to provide knowledgeable and mature supervision. They need to know and enforce all of the rules and warnings printed in this manual to minimize the likelihood of accidents and injuries. They also need to inform users of these rules.
INSTRUCTIONS & MODEL LESSONS The following lessons are examples of an instructional program. They should follow a complete discussion and demonstration of body mechanics between the supervision and the student(s). 1. 2. 3. 4. Mounting and dismounting: Demonstration and practice of proper techniques. Fundamental bounce: Demonstration and practice. Breaking: Demonstration and practice. Breaking on command. Hand and knee drop: Demonstration and practice, stressing four-point landing and alignment.
Lesson 5: Seat Drop Lesson 6: Front Drop 1. Land in a sitting position with your legs parallel to the mat. 2. Place your hands on the mat beside your hips. 3. Push with your hands to return to an erect position. 1. Start from a low bounce and land on the mat in a prone position. 2. Keep your head up and your arms extended forward on the mat. 3. Push with your arms to return to an erect position. Lesson 7: Half Turntable Lesson 8: Swivel Hips 1.
TRAMPOLINE SAFETY INFORMATION In trampoline use, as in all active recreational sports, participants can be injured. However, there are steps that can be taken to reduce risk of injury. In this section, primary accident patterns are identified and the responsibilities of supervisors and jumpers in accident prevention are described.
ENCLOSURE SAFETY INFORMATION NEED FOR TRAMPOLINE ENCLOSURE SAFETY A trampoline enclosure is a recreational product. The information on this page identifies important safety precautions. The precautions are not all-inclusive, because an enclosure can be used in ways that this manual cannot cover completely. To prevent pinches and cuts during enclosure use, a frame pad must be installed on the trampoline (see the trampoline manufacturer’s instructions).
LIMITED WARRANTY Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal use and service conditions. The steel frame is warranted for three (3) years after the date of purchase. All other parts are warranted for one (1) year after the date of purchase. Warranty coverage extends only to the original retail purchaser from the date of original purchase. This warranty is only valid concerning products used for residential use.
NOTE: Skywalker Holdings, LLC is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economical loss, loss of property, loss of revenue or profits, loss of enjoyment or use, cost of removal, installation or other consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages.
