Brochure

Incomparable Dependability
Burner performance optimized for each specific
model. Every burner factory tested.
The burner for each Intrepid boiler is custom manufactured
to Slant/Fin specifications. It is engineered to provide
smooth, clean, efficient operation under all job conditions.
For reliability, every burner is factory test fired before
shipping for optimal performance. Final adjustments are
easily made by the installer.
For dependability, metal push nipples; name brand
controls and circulator pump.
Slant/Fin uses only metal push nipples that expand and
contract with the individual boiler sections that they connect.
No rubber gaskets. That could result in water leaking from the
boiler. Dependable performance is further ensured with
nationally known brands of controls and circulator pumps.
Installation is faster, service is easier with these
special Intrepid features.
Intrepid’s compact size and removable burner door allows it to
fit through doors and stairwells with ease. A strong wooden
crate protects the Intrepid from factory to basement.
Packaged models come pre-wired with the burner mounted,
ready for final setup. Controls are mounted up front for easy
access. The circulator is prewired and bolted to the skid for
shipping. Wiring is long enough for supply side or return
mounting. For your convenience, all models include front and
rear return tappings.
Burner door swings open, lifts off.
Intrepid’s extra large door swings open for routine servicing.
It also lifts off, making it easy to fit the boiler through tight
spaces and down stairs.
Easy access, higher output tankless heater coil.
Tankless cover plate is mounted on cast-iron extended flange.
Stainless steel bolts and cap nuts permit easy removal of seal
or coil. Deeper well accommodates longer coil to maximize
output of domestic hot water.
Advanced Multi Function Control with Built-in
Features:
Simple to use and set-up
• Boiler Temperature Control • Low Water Cut-Off
• Fuel Saving Boiler Reset • Operating Indicators
• Prioritizes Domestic Hot Water
Extended hot water heater coil
performs better.
Metal push nipples outperform
rubber gaskets.
Advanced design cast-iron
boiler sections
Intrepid’s push nipples are located to the
side, out of the way of the flue gases.
This unobstructed flue passage creates
more uniform heat transfer, minimizes
draft loss and reduces soot build-up.
Ordinary
boiler section
Intrepid
boiler section
Advanced design boiler
sections minimize soot buildup.
Cleaning is a snap with our new hinged
flue collector! Our snap hinges make it
super easy to open and reseal. It's easy to
reach all of the heat exchanger surfaces
with a flue brush for routine cleaning.
Swing out door opens for easy servicing.
Intrepid allows for easy cleaning.
Easy access to heating coil.
Burner door designed to swing
open or lift off.
There’s no better built oil-fired boiler than Intrepid. Heat exchanger sections, for example, are made of only the finest cast iron,
finished to exact specifications on automated high precision machining centers. Final assembly of each boiler is performed by hand.
Every boiler section is tested under pressure at least 8 times the normal residential operating pressure. Repetitive testing–individual
sections, assembled heat exchanger and completed boiler, ensure the leak-free integrity of every boiler shipped.
Standard combination high and low limit with
circulator relay control features built-in for the
TR-20P/PT thru TR-60P/PT include:
• Easy to set up, turn dials to adjust
• Easy to read LED display and indicators lights
• Safety water temperature High Limit
• Energy Saving water temperature targeting based on
boiler demand
• Optional outdoor water temperature reset- just add
outdoor sensor
• Low water Cut Off standard- mounted and wired-
auto or manual reset
• Easy to adjust, enable or disable low water temp. limit
• DHW priority