FAQ

Screw in top two then bottom two for each board one at a time.
What if I don’t have 8’ for a section?
If your last or first section in your fence project is less than 8 feet that is fine. The stringers
can be cut to size for a shorter section with any Hack saw or Metal blade saw.
What concrete should I use?
Try to use Post Hole Concrete as it dries quickly and you can get started on your fence
installation quicker than regular concrete. Although either will work.
What tools do I need?
Tools required for the installation of your fence are the following:
1) Post hole Shovel
2) Level
3) ½” socket wrench, open wrench, or socket on a drill
4) Phillips or Robertson #2 screwdriver or drill with either bit.
5) Metal Saw
6) 2" x 6" board 7 feet long
Do I need concrete tubes?
Concrete Post tubes can be used or not. If used an 8" diameter is sufficient.
How do I repair a Broken Fence-post?
There is a Slipfence Repair technique on the Slipfence Website to repair broken Fence posts.
There are also instructions on the website to repair the Post.
How do I repair broken fence-boards?
Unscrew the wood screws holding the fence board in place and simply slip the broken board
out and slip a new fence board in through both stringers making sure it is level with the other
boards in the section and then screw in the wood screws first top and then bottom
!