Installation Sheet

INSTALLATION INSTRUCTIONS FOR RETROFIT
AND COMPLETE SLOAN ECOS
®
DUAL FLUSH ONLY VALVE INSTALLATION
LIMITED WARRANTY
Unless otherwise noted, Sloan Valve Company warrants this product, manufactured and sold for commercial or industrial uses, to be free from defects in material and workmanship
for a period of three (3) years (one (1) year for special finishes, SF faucets, PWT electronics and 30 days for PWT software) from date of purchase. During this period, Sloan Valve
Company will, at its option, repair, replace, or refund the purchase price of any product which fails to conform with this warranty under normal use and service. This shall be the sole
and exclusive remedy under this warranty. Products must be returned to Sloan Valve Company, at customer’s cost. No claims will be allowed for labor, transportation or other costs.
This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does
not cover the life of the batteries.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE
COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
Prior to installing the Sloan ECOS
®
Electronic Flushometer, install the items
listed below as illustrated in the Rough-in Diagram. (New installations only.)
• Closet fixture
• Drain line
• Water supply line
Important:
• ALL PLUMBING SHOULD BE INSTALLED IN
ACCORDANCE WITH APPLICABLE CODES AND
REGULATIONS.
• WATER SUPPLY LINES MUST BE SIZED TO PROVIDE
AN ADEQUATE VOLUME OF WATER FOR EACH
FIXTURE.
• WHEN INSTALLING A FLUSHOMETER, IT IS
IMPORTANT THAT THE FLUSH MODEL MATCHES
THE REQUIREMENTS OF THE PLUMBING FIXTURE.
• FLUSH ALL WATER LINES PRIOR TO MAKING
CONNECTIONS.
The Sloan ECOS
®
is designed to operate with 15 to 80 PSI (103 to 552
kPa) of water pressure.
THE MINIMUM PRESSURE REQUIRED TO THE VALVE
IS DETERMINED BY THE TYPE OF FIXTURE SELECTED.
Consult fixture manufacturer for pressure requirements.
Most High Efficiency water closets require a minimum flowing pressure of
25 psi (172 kPa). Many building codes and the ASME A112.19.2 fixture
standard list Maximum static water pressure as 80 PSI (552 kPa).
8100 HET Complete
Flushometer Models
8100 Series Sloan ECOS
®
Electronic Flush valves are
complete Flushometer valves
and ideal for new installations.
RESS Series Retrofit Conversion Kit Models
RESS Sloan ECOS
®
Electronic models are used to convert existing Royal,
Sloan, and Regal style Flushometers to sensor operation.
Sloan ECOS
®
Electronic Dual Flush Water Closet Model is
furnished for the following:
1.6 gpf/1.1 gpf (6.0 Lpf/4.2 Lpf) For Low Consumption Bowls
1
2
Code No. 0816721
Rev. 8 (10/17)
PRIOR TO INSTALLING THE SLOAN ECOS
®
DUAL-FLUSH ELECTRONIC FLUSHOMETER
TOOLS REQUIRED FOR INSTALLATION
• Slotted screwdriver to adjust control stop.
• Sloan A-50 Super-Wrench™, Sloan A-109 Plier Wrench or smooth jawed spud wrench for couplings.
• Trimpot adjustment screwdriver (supplied) to adjust range, if necessary.
• Strap wrench (supplied) to install Sloan ECOS
®
Electronic to valve body.
• 7/64” hex wrench (supplied) to secure Sloan ECOS
®
Electronic cover to base plate.
Reducing Your Water Footprint™