Specification Sheet
Description
Exposed Water Closet Flushometer for floor mounted or wall hung top
spud bowls. Especially suited for harsh water conditions.
Flush Cycle
Model 110 (factory set at 3.5 gpf/13.2 Lpf)
Model 111 (factory set at 1.6 gpf/6.0 Lpf)
Valve Adjustment Range: 1.5 gpf/5.7 Lpf to 7.0 gpf/26.5 Lpf
Specifications
Quiet, Exposed, Adjustable Piston Type, Chrome Plated Closet
Flushometer with the following features:
• ADA Compliant Metal Oscillating Non-Hold-Open Handle
• Self-cleaning Xpelor
®
Bypass
• 1" I.P.S. Screwdriver Bak-Chek™ Angle Stop
• Vandal Resistant Stop Cap
• Adjustable Tailpiece
• Vacuum Breaker Flush Connection
• Spud Coupling and Flange for 1½" Top Spud
• Stamped Wall Flange
• Ultra High Copper, Low Zinc Brass Castings for Dezincification and
Salt Water Resistance
• Handle Packing, Stop Seat and Vacuum Breaker to be Molded from
PERMEX™ Rubber Compound for Chloramine Resistance
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance
with ASTM Alloy Classification for Red Brass. Valve shall be in
compliance to the applicable sections of ASSE 1037, ANSI/ASME
112.19.6, and Military Specification V-29193.
Variations
GJ
Ground Joint Stop and Tailpiece
U
1¼" Flush Connection and Spud Coupling
XYV
Less Vacuum Breaker
YB
Sweat Solder Adapter Kit
YBYC
Sweat Solder Adapter & Cast Set Screw Wall Flange
YG
Extended Bumper on Angle Stop (for seat with cover)
YO
Bumper on Angle Stop (for open front seat without cover)
NOTE: Bak-Chek™ Angle Stop available with 1" Whitworth Thread
(please specify).
Ground Joint Stop (GJ) recommended for salt water applications.
Vacuum Breaker usually not required when used with non-potable water
(specify XYV Variation).
See Accessories Section of the Sloan catalog for details on these and
other Flushometer variations.
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131
Ph: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380
http://www.sloanvalve.com
Naval
®
Model
Flushometer
X
X
X
X
This space for Architect/Engineer approval
The information contained in this document is subject to change without notice.
Naval 110 S.S. — Rev. 1 (01/03)
Copyright © 2003 SLOAN VALVE COMPANY Printed in the U.S.A.
Made in the U.S.A.