Installation Sheet

MM aa ii nn tt ee nn aa nn cc ee GG uu ii dd ee
SHOWER HEADS
SLOAN VALVE COMPANY • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: [phone] or 1-847-671-4380 • http://www.sloanvalve.com
Copyright © 2003 Sloan Valve Company Printed in the U.S.A. Made in the U.S.A. Act-O-Matic M.G. — Rev. 1b (05/03) Code No. 0816177
AC-450
Institutional Style Self-Cleaning Shower Head
Similar SLOAN Act-O-Matic Institutional Style
Models
In accordance with Federal and State water conservation requirements, all Sloan
Act-O-Matic
®
Shower Heads manufactured after January 1, 1994 are available only
with an integral 2.5 gpm (9.4 Lpm) Flow Control. All model variations of AC-450
Act-O-Matic Shower Heads can be repaired using the SH-1009-A Repair Kit
(see below). When repairing an older AC-450 without a Flow Control, install the
2.5 gpm (9.4 Lpm) Flow Control supplied with the Repair Kit.
Model AC-450
Servicing Instructions
1. Remove Shower Head from wall by unscrewing
two (2) cap screws. Use 5/32'' Allen Head
wrench. (NOTE: Model AC-460 Security Shower
Head may be removed from wall by unscrewing
Locknut from tie rod behind the wall.) Pull
Shower Head body off Pipe Fitting.
2. Remove Adjustment Screw from Shower Head
Body.
3. Remove Spray Disc Assembly by pushing
through back of Shower Head Body.
4. Clean inside of Shower Head Body of all
sediment and replace all O-ring seals.
5. Replace (or add) Flow Control in Pipe Fitting.
6. Replace Spray Disc Assembly and reassemble
Shower Head in reverse order.
To Clean
Spray Disc Assembly:
1. Disassemble Shower Head
according to Servicing
Instructions shown above.
2. Use spanner wrench or
pliers to disassemble Spray
Disc Assembly
(see Exploded View).
3. Clean sediment and debris
from all components.
4. Replace with SH-1009-A
Repair Kit if necessary.
SH-1009-A Repair Kit (4328471)
for AC-450 Model Shower Head includes:
Item Description
1 Shower Head Spray Disc Assembly
2 Spray Disc O-ring
3 Adjustment Screw O-ring
4 Pipe Fitting O-ring
5 2.5 gpm (9.4 Lpm) Flow Control Kit
(SH-1005-A, code number 5328289)
Note: Items 2, 3 and 4 are also available in O-ring Replacement Kit
(SH-1001-A, code number 4328467).
•ACT-O-MATIC
4
3
ADJUSTMENT SCREW
2
1
SPRAY DISC ASSEMBLY
PIPE FITTING
5