User Manual

6
Installation
3. INSTALLATION
Your SM Pro Audio SM HP6 was carefully packed in the factory and the packaging was designed
to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine
the packaging and its contents for any signs of physical damage, which may have occurred in
transit.
+ If the unit is damaged, please do not return it to us, but notify your dealer and the shipping
company immediately, otherwise claims for damage or replacement may not be granted.
Shipping claims must be made by the consignee.
3.1 Rack Mounting
The SM Pro Audio SM HP6 fits into one standard 19" rack unit of space (1 3/4"). Be sure that
there is enough air space around the unit for cooling. As to avoid overheating, please do not
place the SM HP6 on high temperature devices such as power amplifiers.
3.2 Mains voltage
The SM HP6 has a professional internal power supply thus eliminating the use of external power
adaptors found in many lower end headphone amplifier systems. Before you connect your SM
HP6 to the mains, please make sure that your local voltage matches the voltage required by the
unit!
3.3 Audio connections
Analog inputs - On the rear of the SM HP6 there are 8 (4 x stereo pair) 1/4 inch line level audio
jacks which will accept 4 x stereo (L&R) input signals.
Stereo headphone outputs - On the front of the SM HP6 there are 6 x stereo 1/4 Inch output
jacks for connection of 6 x stereo headphone sets.