Installation Manual

Position Designation
F Inverter type label
The type label uniquely identifies the inverter. You will require the information on
the type label to use the product safely and when seeking customer support from
the SMAServiceLine. The type label must remain permanently attached to the
product. You will find the following information on the type label:
• Device type (Model)
• Serial number (SerialNo.)
• Date of manufacture
• Device-specific characteristics
G Type label of the Connection Unit
The type label clearly identifies the Connection Unit. The type label must remain
permanently attached to the product. You will find the following information on the
type label:
• Identification key (PIC) for registration in Sunny Portal
• Registration ID (RID) for registration in Sunny Portal
• WLAN password (WPA2-PSK) for the direct connection to the user interface
of the inverter via WLAN
H Display
The display shows the current operating data and events or errors.
I LEDs
The LEDs indicate the operating state of the inverter.
Symbols on the Inverter and on the Type Label
Symbol Explanation
Inverter
Together with the green LED, this symbol indicates the operating state of the in-
verter.
Observe the documentation
Together with the red LED, this symbol indicates an error.
Data transmission
Together with the blue LED, this symbol indicates the status of the network con-
nection.
Equipment Grounding Terminal
This symbol indicates the position for the connection of an equipment ground-
ing conductor.
4 Product Description
SMA Solar Technology America LLC
Installation manualSB5.0-6.0-1SP-US-40-IA-xx-1014
ENGLISH