Installation Manual

SUNNY BOYSUNNY BOY

15°

Figure 5 : Permitted and prohibited mounting positions

☐ Do not mount multiple inverters directly above one another.

Figure 6 : Permissible and impermissible arrangements of multiple inverters

5.2 Mounting the Inverter

Additionally required mounting material (not included in the scope of delivery):

☐ Three screws suitable for the support surface (diameter: 8mm (0.31in))

☐ Three washers suitable for the screws (outer diameter: 16mm to 24mm (0.62in to 0.94in))

☐ If necessary, three screw anchors suitable for the support surface and the screws

☐ To secure the inverter against theft: one padlock suitable for outdoor use

Padlock dimensions:

• Diameter of the shackle: 8mm to 10mm (0.31in to 0.39in)

• Width of the shackle (inner dimension): 30mm to 40mm (1.18in to 1.57in)

• Height of the shackle (inner dimension): 30mm to 40mm (1.18in to 1.57in)

Risk of injury when lifting the inverter, or if it is dropped

The inverter weighs 26 kg (57.32 lbs). There is risk of injury if the inverter is lifted incorrectly or

dropped while being transported or when attaching it to or removing it from the wall mounting

bracket.

• Transport and lift the inverter carefully.

5 Mounting

SMA Solar Technology America LLC

Installation manualSB5.0-6.0-1SP-US-40-IA-xx-1022

ENGLISH