Installation Manual

General Warnings
All electrical installations must be carried out in accordance with the local electrical standards
and the National Electrical Code
®
ANSI/NFPA 70 or the Canadian Electrical Code
®
CSA
C22.1. This document does not replace and is not intended to replace any local, state,
provincial, federal or national laws, regulations or codes applicable to the installation and use of
the product, including without limitation applicable electrical safety codes. All installations must
conform with the laws, regulations, codes and standards applicable in the jurisdiction of
installation. SMA assumes no responsibility for the compliance or non-compliance with such laws
or codes in connection with the installation of the product.
The product contains no user-serviceable parts.
Before installing or using the product, read all of the instructions, cautions, and warnings in this
manual.
Before connecting the product to the electrical utility grid, contact the local utility company. This
connection must be made only by qualified personnel.
Wiring of the product must be made by qualified personnel only.
General Warnings
SMA Solar Technology America LLC
Installation manualSB5.0-6.0-1SP-US-40-IA-xx-104
ENGLISH