Installation Manual

4. Set the desired parameters.
5. Select [Save all].
☑ The inverter parameters are set.
Accepting the settings
Saving the made settings is indicated by an hourglass symbol on the user interface. If the DC
voltage is sufficient, the data is transferred directly to the inverter and accepted. If the DC
voltage is too low (e.g. in the evening), the settings are saved, but they cannot be directly
transferred to or accepted by the inverter. As long as the inverter has not yet received and
accepted the settings, the hourglass symbol will continue to be displayed on the user
interface. The settings will be accepted when there is sufficient DC voltage applied and the
inverter restarts. As soon as the hourglass symbol appears on the user interface, the settings
have been saved. The settings will not be lost. You can log off of the user interface and leave
the system.
7 Commissioning
SMA Solar Technology America LLC
Installation manualSB5.0-6.0-1SP-US-40-IA-xx-1056
ENGLISH