Instruction Manual

6
Smart Foal transmitter
As mentioned earlier, the transmitter has a magnetic sensor that is used to turn the device on and off.
Once the transmitter has been turned on, the blue transmitting light should begin to flash. It should flash
roughly twice per second.
The charging jack has a dust plug in it. Lift the dust plug out with your fingernail and insert the USB cable
when you need to recharge the transmitter. When the USB cable is inserted correctly the red charging light
will turn on. When charging is complete the red charging light will turn off.
Sometimes the red light doesn’t come on, or it flickers. In this case, you need to jiggle the connector until the
red light remains on.
Charging jack
Charging light
Transmitting light