User's Manual

========================================
========= Modify Bluetooth Settings ===========
========================================
Key [0] - MAIN MENU
Key [1] - Set Discoverability
Key [2] - Set Security Mode
Key [3] - Set Encryption
Key [4] - Set PIN
Key [5] - Set Partner Device
Key [6] - Set Client/Server
Key [7] - Set Local Name
Key [8] - Set Class of Device
After selecting option “1” from the “Modify
Bluetooth Settings” menu, the following menu is
displayed.
It is from this menu that all available Bluetooth
settings can be changed. The available options
are detailed below.
Selecting 0 immediately returns you to the
previous menu storing any changes you have
made
5.4.1. Discoverability
Selecting option “1” will immediately render
adapter “Discoverable”. This means that any
other Bluetooth device can see adapter when it
performs a device discovery.
======================================
=========== Set Discoverability =============
======================================
Key [0] - PREVIOUS MENU
Key [1] - On
Key [2] - Off
Discoverability: On
Selecting option “2” immediately renders the adapter
“non-discoverable”. No other Bluetooth devices
will be able to see the adapter when they
perform a device discovery. However, in this
mode, your adapter is still “connectable”. This
means that any other Bluetooth device that
knows about your specific adapter (i.e. it knows
the Bluetooth address of the individual unit) can
still connect to it. You may wish to set this option
to avoid confusion when many adapters exist in
close proximity to each other.
Unlike the communications settings, this Bluetooth setting is applied with immediate effect.
5.4.2. Security Mode
After selecting option “2” from the “Modify Bluetooth
Settings” menu, the following menu is displayed.
====================================
=========== Set Security Mode ===========
====================================
====
Key [0] - PREVIOUS MENU
Key [1] - 1 (Low)
Key [2] - 2 (Medium)
Key [3] - 3 (High)
Security Mode: 3 (High)
The factory set security mode is 3 (Highest)
Selecting 0 immediately returns you to the previous
menu storing any changes you have made.
Selecting option “1” will immediately place your
ADAPTER into security mode 1. This is the lowest
security mode that the ADAPTER can be configured to.
Connections, including service discovery, can take place
without the need for “pairing” or “bonding”. In mode 1,
the Security Manager automatically accepts all
access requests without initiating authentication,
encryption, or authorization procedures. Any attempt
by a remote application to perform authentication or
encryption procedures will be rejected.
STBTIOBxXXPARSM User Guide 2.8 © Copyright SMART Modular Technologies 2004 Page 11 of 30