User's Manual

5.4.3. Encryption
After selecting option 3 from the “Modify
Bluetooth Settings” menu, the following menu is
displayed.
========================================
========= Modify Bluetooth Settings ===========
========================================
Key [0] - MAIN MENU
Key [1] - Set Discoverability
Key [2] - Set Security Mode
Key [3] - Set Encryption
Key [4] - Set PIN
Key [5] - Set Partner Device
Key [6] - Set Client/Server
Key [7] - Set Local Name
Key [8] - Set Class of Device
The factory set Encryption mode is “Disabled”. This
can be changed to enable “Point to Point” or “Point
to Point & Broadcast”.
========================================
============== Set Encryption ==============
========================================
Key [0] - PREVIOUS MENU
Key [1] - Disabled
Key [2] - Point to Point
Key [3] - Point to Point & Broadcast
Encryption: Disabled
Unlike the communications settings, this Bluetooth
setting is applied with immediate effect.
5.4.4. PIN
========================================
====== Modify Bluetooth Settings =======
========================================
Key [0] - MAIN MENU
Key [1] - Set Discoverability
Key [2] - Set Security Mode
Key [3] - Set Encryption
Key [4] - Set PIN
Key [5] - Set Partner Device
Key [6] - Set Client/Server
Key [7] - Set Local Name
Key [8] - Set Class of Device
The PIN (Personal Identification Number) is used to
create a secure and trusted connection between 2
Bluetooth devices during a process called pairing or
bonding.
After selecting option 4 from the “Modify Bluetooth
Settings” menu, the following menu is displayed.
========================================
=============== Set PIN ================
========================================
Key [0] - PREVIOUS MENU
Key [1] - “ADAPTER”
Key [2] - “1234”
Key [3] - “01234567”
Key [4] - Enter your own pin
PIN Code: RS232
The PIN can be any combination of printable
characters. The PIN is only used when the adapter is
configured to be in security mode 2 or 3 (High or
Medium security)
The factory set PIN is “1234”. This can be changed
to a range of pre-selected values, or you may enter
you own combination up to a maximum of 8
characters.
Selecting 0 immediately returns you to the previous
menu storing any changes you made.
STBTIOBxXXPARSM User Guide 2.8 © Copyright SMART Modular Technologies 2004 Page 13 of 30