User's Manual

Selecting option 4 from the “Set PIN” menu will
display the following menu below.
========================================
================ Set PIN =================
========================================
Key [0] - PREVIOUS MENU
Key [1] - “ADAPTER”
Key [2] - “1234”
Key [3] - “01234567”
Key [4] - Enter your own pin
PIN Code:
In this field, you can enter your desired PIN code.
This can be any printable alphanumeric character
or symbol, but you should take care to choose a
PIN appropriately remembering that some
Bluetooth devices (e.g. cell phones) only have
limited input mechanisms and may not have a full
range of characters available.
Enter the new pin:
Enter the new pin:
5555555555
Error: The pin must be 8 characters or less
Enter the new pin:
Due to memory considerations the length of the
PIN code is restricted to 8 characters. If you try to
create a PIN code that is larger than this, an
error message is generated and you will be given
another opportunity to enter your own PIN
Once you have entered the PIN you want, you should
complete your request by hitting the “ENTER”
key, whereupon the original menu is displayed,
showing your new PIN selection.
Enter the new pin:
RS232
========================================
=============== Set PIN ================
========================================
Key [0] - PREVIOUS MENU
Key [1] - "ADAPTER"
Key [2] - "1234"
Key [3] - "01234567"
Key [4] - Enter your own pin
PIN Code: 1234
If your ADAPTER is to be configured into Client
mode, this is the PIN that will be used by ADAPTER
to initiate pairing with the remote device before
any connection is made. If your remote device is
another ADAPTER in Server mode, you will need to
ensure that “both” devices are configured to use
the same PIN number.
Unlike the communications settings, this
Bluetooth setting is applied with immediate effect.
STBTIOBxXXPARSM User Guide 2.8 © Copyright SMART Modular Technologies 2004 Page 14 of 30