User's Manual

5.4.7. Local Device Name
In scenario’s where more than 1 ADAPTER is to
be used in the same geographical location (i.e.
they are all in range of each other/the controlling
device), it may be pertinent to change the name
of each device to more easily identify each
individual device.
========================================
====== Modify Bluetooth Settings =======
========================================
Key [0] - MAIN MENU
Key [1] - Set Discoverability
Key [2] - Set Security Mode
Key [3] - Set Encryption
Key [4] - Set PIN
Key [5] - Set Partner Device
Key [6] - Set Client/Server
Key [7] - Set Local Name
Key [8] - Set Class of Device
After selecting option 7 from the “Modify
Bluetooth Settings” menu, the following menu is
displayed.
========================================
============ Set Local Name ============
========================================
Key [0] - PREVIOUS MENU
Key [1] - “SMBT-178 RS232 SPA1”
Key [2] - “SMBT-178 RS232 SPA2”
Key [3] - “SPA_1”
Key [4] - “SPA_2”
Key [5] - Enter your own local device name
Local Device Name: SMBT-178 RS232 SPA1
========================================
============ Set Local Name ============
========================================
Key [0] - PREVIOUS MENU
Key [1] - “SMBT-178 RS232 SPA1”
Key [2] - “SMBT-178 RS232 SPA2”
Key [3] - “SPA_1”
Key [4] - “SPA_2”
Key [5] - Enter your own local device name
Local Device Name: SMBT RS232 Adapter
The Factory setting for the local device name is
“SMBT RS232 Adapter”.
Selecting 0 immediately returns you to the
previous menu storing any changes; selecting
any other option will store the appropriate
configuration selection.
Selecting options 1-4 configure the ADAPTER to
use one of the pre-configured name options.
As an example we will choose ‘1’
After making the selection the devices local
name immediately updates.
Enter the new local name:
If you wish to use a name other than those listed,
you’ll need to select option 5.
Enter your own local device name:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Error: The local name must be 31 characters or less
Enter the new local name:
Enter the name you’d like your ADAPTER to
display.
Memory constraints mean that you must ensure
that your desired name is less than 31
characters. You cannot use the “delete” key as
this will be interpreted as part of the name.
STBTIOBxXXPARSM User Guide 2.8 © Copyright SMART Modular Technologies 2004 Page 17 of 30