User's Manual

Press ENTER when you are satisfied with your
name.
Enter the new local name: RS232 Test Adapter
========================================
============ Set Local Name ============
========================================
Key [0] - PREVIOUS MENU
Key [1] - “SMBT-178 RS232 SPA1”
Key [2] - “SMBT-178 RS232 SPA2”
Key [3] - “SPA_1”
Key [4] - “SPA_2”
Key [5] - Enter your own local device name
Local Device Name: RS232 Test Adapter
The menu will now update with your chosen
name selection.
5.4.8. Device Class
The Factory setting for the Class of device is
“Peripheral”.
========================================
====== Modify Bluetooth Settings =======
========================================
Key [0] - MAIN MENU
Key [1] - Set Discoverability
Key [2] - Set Security Mode
Key [3] - Set Encryption
Key [4] - Set PIN
Key [5] - Set Partner Device
Key [6] - Set Client/Server
Key [7] - Set Local Name
Key [8] - Set Class of Device
Selecting 0 immediately returns you to the previous
menu storing any changes; selecting any other
option will store the appropriate configuration
selection.
This menu option allows the selection of a number of
different device types as defined by the Bluetooth
specification.
IMPORTANT NOTE: Changing this Class of Device
setting does not alter the published functionality of
the product. It will continue to offer ONLY One Serial
port profile connection.
This option does not take effect until ADAPTER is re-
booted (power switched off and then on again).
========================================
=========== Set Class of Device ==============
========================================
DEVICE MUST BE REBOOTED IN ORDER TO APPLY THIS
SETTING
Key [0] - PREVIOUS MENU
Key [1] - Peripheral
Key [2] - Desktop
Key [3] - Laptop
Key [4] - Imaging
Key [5] - Phone/Modem
Key [6] - LAN
Class of Device: Peripheral
STBTIOBxXXPARSM User Guide 2.8 © Copyright SMART Modular Technologies 2004 Page 18 of 30