User's Manual

ManualsBrandsSmart Modular Technologies ManualsElectronicsBluetooth RS232 DCE adapter

Table Of Contents

5.3.2. Entering your own baud rate

======================================

============= Set Baud Rate ==============

Key [0] – PREVIOUS MENU

Key [1] - 921600

Key [2] - 460800

Key [3] - 230400

Key [4] - 115200

Key [5] - 57600

Key [6] - 38400

Key [7] - 19200

Key [8] - 9600

Key [9] - 4800

Key [a] - 2400

Key [b] - 1200

Key [c] - 300

Key [d] – Enter your own baud rate

Baud rate: 115200 (actual 115168) - applied

Selecting option (d) from the “Set Baud Rate” Menu

allows the user to configure the product to operate at

any baud rate the user desires between 244 baud

and 1.3M baud. The adapter will calculate the

nearest actual baud rate it is able to achieve and

display it next to your selection, as shown in the

configuration menu’s below.

Enter the new baud rate:

Enter the baud rate value you want, followed by

hitting the return (ENTER) key.

The value you enter must be between 244 and 1382400

otherwise an error will be shown. You will be given a

further opportunity to enter a valid value.

Enter the new baud rate: 12345676

Error: The baud rate must be 7 digits or less

Enter the new baud rate:

Entering a valid number here such as shown left

results in your selection being accepted and your

baud rate selection being displayed at the bottom of

the menu.

Selecting 0 immediately returns you to the previous

menu storing any changes you have made; selecting

any other option will store the appropriate

configuration selection. As shown below, your

configuration selection will not actually be applied at

this point.

Enter the new baud rate: 15000

The Menu identifies this new selection as being unapplied. To apply this selection, select the “Apply COMM Settings” from

the previous menu. This can be reached by selecting option “0”.

Unapplied settings are discarded during a re-boot of the adapter.