Installation Guide

www.smartsolar.com

Maintenance

Regularly clean the solar panel using water or

glass cleaner in conjunction with a non abrasive

sponge or cloth. If the air stones or tubing become

blocked clean and rinse them through with water.

We recommend that you regularly carry out maintenance to ensure optimum performance of your fountain.

Oxygenator

Assembly

Position the solar panel to receive the

maximum amount of direct sunlight.

Solar Panel Position

Uncoil the tubing, connect the air stones at one end and connect the other ends to the main unit.

1. Check the solar panel is positioned correctly, receiving sunlight and not in shade. The pump should

vibrate if it is working properly and receiving sufficient sunlight.

2. Check connections between the pump and panel.

3. Check that the air stones and tubing are not blocked, clean if necessary.

4. Check that the air stones are not too deep in the water, move them closer to the surface if necessary.

5. If the pump is vibrating but no air bubbles are being produced the internal motor may have moved

preventing the internal air pumps from working properly. If the motor moves too far away from the

magnets the internal air bellows may not move, if too close the bellows may move too quickly and

pump insufficient air. The unit can be opened and the motor position can be altered until air flows

properly (see details below).

6. If problems persist or you require assitance contact customer services (refer to contact sheet or

website).

Problem Solving

Unscrew to move

motor position

Motor

Magnets

Bellows