Network Router User Manual

Page 63 of 74
intelligent wireless platform
airClient™ TOTAL 3416 User Guide
5.5. System User
The airClient TOTAL unit allows the user to create Read Only users, to only allow the users to only view
the configurations of the unit. This Read Only user cannot edit any configurations, and cannot reboot the
unit or restore the unit to factory default settings.
This menu option allows the user to change the Read Only user name and/or password to access the
unit. Follow the steps here to change the user name and/or password for this Read Only User –
1. From the top navigation menu bar, click on Tools | System User. A System User interface will
appear as shown below.
2. Enter the user name you wish in the Common User field.
3. Enter the new password in Password and Verify Password fields. Click on the Save button to
save the settings.
4. Click on the Save button to save the settings.
Figure 5-4 airClient TOTAL Read Only User Configuration
5.6. SNMP Configuration
The user can enable or disable the SNMP configuration using this tool.
Follow the steps below to change the SNMP settings:
1. Click on Tools | SNMP Configuration to access the SNMP Configuration page, as shown below
in Fig 5-5.
2. Enable or Disable SNMP by using the checkbox.
3. Set the Read Community String to smartBridges.
4. Set the System Contact/Location on the page, if required.
5. Click on the Save button for the changes to take effect.