Network Router User Manual

Page 71 of 74
intelligent wireless platform
airClient™ TOTAL 3416 User Guide
To refresh or clear the Syslog entries logged locally on the device, follow the steps below:
1. Select Tools | System Log from the Navigation menu bar. The System Log web page will appear
as shown above in Fig 5-13.
2. At the bottom of this page, there are two buttons, Refresh and Clear, as shown in the above
figure.
3. Click on Refresh button to refresh the logs shown on the web page.
4. Click on Clear button to clear all the logs stored locally on the unit. (Note: Logs once deleted,
cannot be retrieved again).
5.12. Reboot
The device would need to be rebooted in case any changes are to be made to the system, or a new
firmware is downloaded. Click on Tools | Reboot to reboot the unit. A figure showing the countdown to 0
will appear as shown below during the Reboot process.
Figure 5-14 airClient TOTAL Reboot page
Note: The reboot may take around 30 seconds to complete
Once the reboot is complete, click Here on the following screen to get the last page prior to the reboot.