User Guide

LampLinc Owner’s Manual
Page 3 of 19
ABOUT LAMPLINC
LampLinc presents you with an elegant and stylish way to dim and remotely control any lamp or other
plug-in device in your home at the touch of a button. Send commands to LampLinc from an INSTEON
Controller. Or conveniently control other Linked INSTEON devices by using the buttons on the side of
LampLinc. The Load Sensing feature can control Linked INSTEON devices by turning the device on and
off from its built-in switch.
Status LED
Set button
Down button
Up button Outlet
Key LampLinc Features
Feature 2457D2 (Dual-Band) 2457D2X
Installs and Links to other INSTEON devices in
minutes
X X
Controls all standard incandescent lamps and other
plug-in devices up to 300 Watts
X X
Responds to and controls other INSTEON devices as
well as X10 devices
X X
Indicates INSTEON setup mode activity and
operational states with a dual-color Status LED and
beeper
X X
Dims the load up to 32 brightness levels X X
Changes brightness at 32 Ramp Rates X X
Load Sensing easily disabled and re-enabled X X
Communicates simultaneously over both radio
frequency (RF) and the power line
X
Acts as an access point for INSTEON RF-only devices X
Stores setup state in memory so settings aren’t lost
during power outages
X X
Two-year warranty X X
What is Included with LampLinc
• LampLinc – INSTEON Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin or LampLinc – INSTEON
Plug-In Lamp Dimmer Module, 2-Pin
• Quick-Start Guide