Use and Care Guide

PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE’S: 1-888-755-4497

Step 1. Before cleaning,

always disconnect the pump

from the power source and

remove the inlet screen.

Step 2. Remove the

impeller housing to expose

the impeller assembly.

Step 3. Remove the

impeller assembly by gently

pulling on the impeller

blades. The impeller is held

in place by a magnet.

Step 5. Reassemble all

pump parts and place in

water before reconnecting

to the power source.

Step 4. Use a soft cloth or

brush and warm water to

clean the impeller, the inside

of the impeller housing and

the rotor housing.

TROUBLESHOOTING

IF THE PUMP FAILS TO OPERATE:

• Check to make sure the power cord is plugged in; the pump is getting

power.

• Check the pump outlet and any tubing, nozzles, spitters etc. for kinks

or obstructions.

• Remove the inlet screen and/or pump cover, and impeller housing to

expose the impeller. Turn the impeller to ensure that it is not broken or

jammed.

IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY

OR THE PUMP DOES NOT FLOW EVENLY:

• Check to make sure the pump is completely submerged in water.

• Check to make sure the impeller and the housing are clean.

• Adjust ow control.

For more information on product maintenance and

maintenance videos, visit www.smart-pond.com/

maintenance