User's Manual

QUICK GATEWAY CONFIGURATION
Warning: Do not press the Reset button unless you want to clear the current settings. The Reset button is in a small cir-
cular hole on the rear panel. If you want to restore the default settings, insert a thin wire (such as a paper clip) into
the hole, press the Reset button for 1 second, and then release the button. The system reboots and returns to the fact-
ory defaults.
Logging in to your gateway
To change the settings on your gateway, you must log in to the gateway's interface. Make sure that you have completed
the steps in "Installation" on page 2 before you begin.
1. Open your internet browser application and type 192.168.1.1 into the address line. The login dialog appears.
2. Enter the factory default credentials shown below and click Log In.
User Name: admin Password: admin
Note: Your service provider may use other settings. Contact your provider for details.
5