User's Manual

Manual Method
Set up your gateway’s parameters first, then follow these steps.
1. In the left menu, click Wireless and then the band that you want to configure.
2. Click Security and scroll down to the Manual Setup AP section.
3. If your gateway supports multiple wireless networks, select the SSID of the network you wish to configure. You
will need this ID for step 8.
4. Select the desired Network Authentication. Make sure that the host devices you intend to use support the
selected authentication type.
5. Choose a WPA Passphrase and type it in to this field. You will need this passphrase for step 8.
6. Select any desired encryption preferences in the lower three fields.
7. Click Apply / Save.
8. Follow the WiFi connection instructions provided with your client device to connect to the router. Use the SSID
name you selected in Step 3 and enter the same passphrase that you entered in step 5 to set up the connection
on your client device.
9