User's Manual

SMA Technologie AG Commissioning the Sunny Mini Central
Installation Guide SMC50A_60A-IEN073320 Page 53
In case of failures
In case of a failure, the message "Disturbance" will be
indicated in the status bar.
The exact error message follows.
For example, if the "Disturbance" message shown
here is displayed immediately after connection, it
may be due to the fact that the AC wire is not
correctly connected or the circuit breaker is not
switched on.
If a measured value is responsible for the fault
condition, then the value measured at the time of the
fault is displayed. If another measurement is possible,
the current value is displayed in the second line.
Please refer to the operating manual of the Sunny Mini Central to read the
exact explanation of the error and status messages!
Display Description
E-today 0 Wh
Mode Disturbance
Disturbance
Vac-Bfr
at: 261V
present: 245 V