4-Port ADSL Router User Manual

Adding ATM VCs
101
Adding ATM VCs
You may need to create a VC if none has been predefined
on your system or if you use multiple services with your ISP.
Each service may require its own VC. Follow these instructions
to add a VC:
1.
From the [ATM VC Configuration] page, click [Add].
The [ATM VC - Add] page appears, as shown in Figure 34.
Figure 34. ATM VC-Add Page
2.
Select an interface name from the [VC Interface:]
drop-down list.
3.
Enter the [VPI:] and [VCI:] values assigned by your ISP,
and select the [Mux Type:] from the drop-down list.
4.
In the [Max Proto per AAL5:] text box, enter the number
of protocols that the ISP indicated that you will need
to configure (usually only one).
5.
Click [Submit].