4-Port ADSL Router User Manual

Modifying ATM VCs
103
Figure 35. ATM VC Interface - Modify Page
2.
Enter the new [VPI:] and [VCI:] values, select the [Mux Type:],
or change the maximum number of protocols that the VC can
carry, as directed by your ISP.
You cannot modify the interface type over which an existing
VC operates (aal5-0, for example). If you want to change the
interface type, you must delete the existing interface, create
a new one, and select the desired interface type.
3.
Click [Submit].
4.
On the [Confirmation] page, click [Close] to return to the
[ATM VC Configuration] page.
5.
Click the [Admin] tab, and then click [Commit & Reboot]
in the task bar.
6.
Click [Commit] to save your changes to permanent memory.
You can verify that the new settings work by attempting to
access the Internet from a LAN computer. Contact your ISP
for troubleshooting assistance.