4-Port ADSL Router User Manual

Configuring IP Filters
141
Security
Level:
This is the security level that must be enabled globally for this rule
to take affect. A rule will be active only if its security level is the
same as the globally configured setting (shown on the main
[IP Filter Configuration] page). For example, if the rule is set to
[Medium] and the global firewall level is set to [Medium], then the
rule will be active; but if the global firewall level is set to [High] or
[Low], then the rule will be inactive.
Blacklist
Status:
This field specifies whether or not a violation of this rule will result
in the offending computer's IP address being added to the
Blacklist, which blocks the ADSL Barricade from forwarding
packets from that source for a specified period of time. See
Configuring Firewall Settings on page 131 for instructions.
Log Tag: This is a description of up to 16 characters to be recorded in the
log in the event that a packet violates this rule. Be sure to set the
[Log Option] to [Enable] if you configure a Log Tag.
Start Time
(HH MM SS):
End Time
(HH MM SS):
The time range during which this rule is to be effective, specified
in military units.