4-Port ADSL Router User Manual

Quick Start
8
Figure 1. Overview of Hardware Connections
Step 1. Connect the ADSL cable
Connect one end of the provided phone cable (RJ-11) to the port
labeled ADSL on the Rear Panel of the device. Connect the other
end to your wall phone jack.
You can attach a telephone line to the device. This is helpful
when the ADSL line uses the only convenient wall phone jack.
If desired, connect the telephone cable to the port labeled Phone .
Warning:
Although you use the same type of cable, the ADSL
and Phone ports are not interchangeable. Do not
route the ADSL connection through the Phone port.
Note:
ADSL splitters/microfilters are included with some
models.
Wall Jack
To a hub: use cross-
over cable to uplink
port or straight cable
to standard port
or
To a PC: use a
cross-over cable
AC adapter
Networked Computers
Stand-alone computer
ADSL Barricade
Hub/switch (for local
area network)