4-Port ADSL Router User Manual

Using Diagnostics
161
- TEAppl.gsz
- Filesys.bin
-TEPatch.bin
3.
Click [Upload]. The following message box appears at the
bottom of the page:
Loading New Software:
Please do not interrupt the upgrade process.
A status page will appear Automatically when
loading is completed (about 1 minute).
4.
When loading is complete, the following message appears
(the file name may differ):
File:
TEDsl.gsz successfully saved to flash. Please reboot for
the new image to take effect.
Turn power to the unit off, wait a few seconds, and turn it on
again. The new software will now be running. If the system
fails to boot or is not working properly, contact your ISP for
troubleshooting assistance.
Using Diagnostics
The diagnostics feature executes a series of tests of your system
software and hardware connections. Use this feature when
working with your ISP to troubleshoot problems.
Follow these instructions to begin the diagnostics program:
1.
Log into the Configuration Manager, click the [Admin] tab.
Then click [Diagnostics] in the task bar. Figure 60 shows the
[Diagnostics] page.