4-Port ADSL Router User Manual

Configuring Your Computers
11
Windows 2000
First, check for the IP protocol and, if necessary, install it.
1.
In the Windows task bar, click the [Start] button,
point to [Settings], and then click [Control Panel].
2.
Double-click the [Network and Dial-up Connections] icon.
3.
In the [Network and Dial-up Connections] window, right-click the
[Local Area Connection] icon, and then select [Properties]. The
[Local Area Connection Properties] dialog box displays a list
of currently installed network components. If the list includes
[Internet Protocol (TCP/IP)], then the protocol has already
been enabled. Skip to Step 10.
4.
If [Internet Protocol (TCP/IP)] does not appear as an installed
component, click [Install...].
5.
In the [Select Network Component Type] dialog box, select
[Protocol], and then click [Add…].
6.
Select [Internet Protocol (TCP/IP)] in the [Network Protocols]
list, and then click [OK]. You may be prompted to install files
from your Windows 2000 installation CD or other media.
Follow the instructions to install the files.
7.
If prompted, click [OK] to restart your computer with the new
settings. Next, configure the PCs to accept IP information
assigned by the ADSL Barricade.
8.
In the [Control Panel], double-click the [Network and Dial-up
Connections] icon.
9.
In the [Network and Dial-up Connections] window, right-click
the [Local Area Connection] icon, and then select [Properties] .